NTCAIMME3 www.vishay.com vishay bccomponents revision: 03-mar-17 1 document number: 29131 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ntc thermistors, miniature immersion sensor note ? other r 25 values and tolerances available upon request fig. 1 - mounting example wi th sealing ring and screw features ? fast time response for fluid immersion applications ? reduced thermal gradient, due to the use of small tip dimensions and thin insulated wire ? sensor for permanent contact with water or other liquids ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications immersion sensor used for temperature measurement, sensing and control in: ? water boilers ? heating systems ? chiller systems ? water and used water systems ? water and oil tanks ? consumer appliances, coffee machines ? industrial appliances ? solar heating systems description miniature insulated chip ntc thermistor mounted in a ss304 housing with or without brass collar for sealed mounting and twin pvc in sulated awg#30 lead wire connection. mounting ? the sensor can be mounted by means of a sealing o-ring and screw ? the end wire can be soldered , or crimped to a connector ? optional connector for wire -to-wire or wire-to-board connections ? the contact area with the liquid is preferably min 10 mm down from the tip and max to the brass collar location (see fig. 1 for mounting example) ? not intended for corrosive or high acidic liquids ? the epoxy lead-wire side can not be in permanent contact with liquids, or water packaging available in plastic bags of 250 pieces. design-in support ? other resistance curves and tolerances are available on request ? consult vishay for other lead length ? 3d solid models: www.vishay.com/doc?29106 ? for complete rt curve computation, visit: ? www.vishay.com/thermistors/ntc-curve-list/ quick reference data parameter value unit resistance value at 25 c 10k ? tolerance on r 25 -value 3 % b 25/85 -value 3984 k tolerance on b 25/85 -value 0.5 % operating temperature range ? at zero dissipation -25 to +105 c response time t 63.2 % of ? t ? (air 25c to water 85c) 1.5 s dissipation factor ? mw/k mounted in still air 2.8 in still water 5.6 maximum power dissipation at 55 c 100 mw min. dielectric withstanding voltage between terminals and capsule (10 s) 500 v ac insulation resistance at 500 v dc > 100m ? thermal gradient < 0.02 k/k weight 2.1 g electrical data and ordering information r 25 r 25 -tol. b 25/85 b 25/85 -tol. description sap material and ordering number ( ? )(%) (k) ( %) 10 000 3 3984 0.5 ntc immersion 10k 3 % 3984k 0.5 % NTCAIMME3c90373 10 000 3 3984 0.5 ntc 10k 3 % 3984k 0.5 % no ring NTCAIMME3c90686
NTCAIMME3 www.vishay.com vishay bccomponents revision: 03-mar-17 2 document number: 29131 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters notes (1) vishay thermistor chip ntc, epoxy insulated (2) pvc cable, single insulated 105 c, 300 v rated, awg #30 multi-stranded twin (3) stainless steel (ss304) housing (4) brass collar (not present on the NTCAIMME3c90686 type) (5) epoxy potting resin (6) pre-tinned end wire stripped for complete curve computation, visit: www.vishay.com/thermistors/ntc-curve-list/ l1 l2 l3 l4 l5 l6 l7 l8 ? d1 ? d2 ? d3 ? d4 ? d5 ? d6 200 20 4 23 2 5 3.4 2.05 13 6.8 + 0/- 0.1 3.9 0.1 2.52 10.3 resistance temperature characteristics temp. (c) r (t) / r 25 resistance ( ? ) ? r / r (%) ? (%/k) ? t (k) r min. ( ? ) r max. ( ? ) -25 12.990 129 900 4.39 -5.99 0.73 124 202 135 598 -20 9.676 96 761 4.22 -5.79 0.73 92 675 100 848 -15 7.276 72 765 4.07 -5.61 0.73 69 806 75 723 -10 5.522 55 218 3.92 -5.43 0.72 53 056 57 380 -5 4.227 42 268 3.77 -5.26 0.72 40 674 43 861 0 3.262 32 624 3.63 -5.10 0.71 31 440 33 808 5 2.538 25 381 3.49 -4.94 0.71 24 494 26 268 10 1.990 19 897 3.36 -4.80 0.70 19 227 20 566 15 1.571 15 711 3.24 -4.65 0.70 15 202 16 220 20 1.249 12 493 3.12 -4.52 0.69 12 103 12 882 25 1.000 10 000 3.00 -4.39 0.68 9700.0 10 300 30 0.8056 8056.0 3.11 -4.26 0.73 7805.1 8306.8 35 0.6530 6529.7 3.22 -4.14 0.78 6319.3 6740.2 40 0.5324 5323.9 3.33 -4.03 0.83 5146.6 5501.1 45 0.4365 4365.3 3.43 -3.92 0.88 4215.4 4515.1 50 0.3599 3598.7 3.53 -3.81 0.93 3471.6 3725.8 55 0.2982 2982.3 3.63 -3.71 0.98 2874.0 3090.5 60 0.2484 2483.8 3.72 -3.61 1.03 2391.3 2576.3 65 0.2079 2078.7 3.81 -3.51 1.09 1999.4 2157.9 70 0.1748 1747.7 3.90 -3.42 1.14 1679.5 1815.9 75 0.1476 1475.9 3.99 -3.34 1.20 1417.1 1534.8 80 0.1252 1251.8 4.07 -3.25 1.25 1200.8 1302.8 85 0.1066 1066.1 4.15 -3.17 1.31 1021.8 1110.4 90 0.09116 911.59 4.23 -3.09 1.37 873.01 950.16 95 0.07825 782.46 4.31 -3.02 1.43 748.75 816.17 100 0.06741 674.11 4.38 -2.94 1.49 644.56 703.66 105 0.05828 582.84 4.46 -2.87 1.55 556.87 608.82
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
